Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000084458
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084459
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084461
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084462
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084464
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084465
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084467
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084468
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084470
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084471
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084473
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084474
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084476
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084477
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084479
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece rea
- OT-2026-000084480
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece rea
- OT-2026-000084482
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece rea
- OT-2026-000084483
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece rea
- OT-2026-000084485
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084486
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084488
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084489
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the
- OT-2026-000084491
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000083495
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083497
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083501
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083503
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083507
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083509
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083513
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083515
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083519
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083521
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083525
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000083527
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000083531
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000083535
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083537
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083541
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083543
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083547
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083549
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083553
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083555
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083559
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083561
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000083565
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000083567
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000083571
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000083573
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off