Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000063688
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063690
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 979 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000063692
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063693
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000063694
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 944 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000063697
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,041 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000063700
  Six bellows cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,004 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000063701
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,023 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow

• OT-2026-000063702
  Three pad foam vacuum gripper, three outlet manifold, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 979 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063704
  Six bellows cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 969 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000063706
  Three pad foam vacuum gripper, three outlet manifold, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 944 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063709
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,057 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow

• OT-2026-000063712
  Six bellows cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,003 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000063714
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 994 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063716
  Six bellows cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 968 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000063717
  Three cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063718
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 959 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063721
  Three cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063724
  Six bellows cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,003 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000063726
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 979 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063728
  Six bellows cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 968 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000063729
  Three cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063730
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 944 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063733
  Three cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,041 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063736
  Six bellows cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 968 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000063738
  Three pad foam vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 994 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063741
  Three cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063742
  Three pad foam vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 959 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063744
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063745
  Three cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,041 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063748
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063750
  Three pad foam vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 979 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063753
  Three cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063754
  Three pad foam vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 944 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000063756
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063757
  Three cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,041 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi

• OT-2026-000063760
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063762
  Three pad foam vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 980 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posit

• OT-2026-000063764
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063766
  Four pad foam vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 994 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000063768
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063769
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000063770
  Four pad foam vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 959 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000063773
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,041 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000063776
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063778
  Four pad foam vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 979 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000063780
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000063781
  Four cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000063782
  Four pad foam vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 944 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000063785
  Four cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,041 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit