Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000063290
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000063292
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpie
- OT-2026-000063293
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow
- OT-2026-000063296
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpie
- OT-2026-000063297
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow
- OT-2026-000063298
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000063302
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000063304
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpie
- OT-2026-000062804
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000062653
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacu
- OT-2026-000062654
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vent
- OT-2026-000062656
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062657
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062660
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062661
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062662
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posi
- OT-2026-000062666
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posi
- OT-2026-000062668
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062669
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062672
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062673
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062674
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posi
- OT-2026-000062678
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posi
- OT-2026-000062680
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062681
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062684
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062685
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062686
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000062690
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000062692
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062693
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062696
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062698
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000062701
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062702
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000062704
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062705
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062708
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000062710
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000062713
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062716
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the work
- OT-2026-000062717
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000062718
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000062720
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the work
- OT-2026-000062722
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000062725
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-
- OT-2026-000062726
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000062728
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the work
- OT-2026-000062729
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-
- OT-2026-000062730
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente