Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000062284
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000062285
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-
- OT-2026-000062286
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000062293
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000062294
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the va
- OT-2026-000062296
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000062298
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the va
- OT-2026-000062300
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000062301
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000062306
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reach
- OT-2026-000062308
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062309
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000062310
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reach
- OT-2026-000062312
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062313
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000062318
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reach
- OT-2026-000062320
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062321
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000062322
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reach
- OT-2026-000062324
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062325
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000062330
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000062332
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062333
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000062334
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000062336
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062341
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000062342
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000062344
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000062345
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000062346
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position
- OT-2026-000062348
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000062354
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vac
- OT-2026-000062356
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000062357
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum c
- OT-2026-000062358
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reache
- OT-2026-000062361
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum c
- OT-2026-000062364
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000062365
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum c
- OT-2026-000062366
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reache
- OT-2026-000062368
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000062370
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reache
- OT-2026-000062373
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062376
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000062377
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062378
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position,
- OT-2026-000062380
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000062381
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000062385
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the
- OT-2026-000062386
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position,