Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000052994
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000052998
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000053001
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000053005
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000053006
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053010
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053013
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053014
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053017
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053018
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053021
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053025
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053026
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053030
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053033
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053037
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053038
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053045
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053046
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053049
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053050
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053057
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053058
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053061
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053062
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000053069
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053070
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posi
- OT-2026-000053073
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi
- OT-2026-000053074
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posi
- OT-2026-000053081
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp
- OT-2026-000053082
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posi
- OT-2026-000053085
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp
- OT-2026-000053086
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posi
- OT-2026-000053093
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp
- OT-2026-000053094Foam pad vacuum gripper, common isolation valve, pump fed, vented before set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000053097
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp
- OT-2026-000053098Foam pad vacuum gripper, common isolation valve, pump fed, vented before set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000053102Foam pad vacuum gripper, common isolation valve, pump fed, vented before set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000053105
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow
- OT-2026-000053109
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow
- OT-2026-000053110
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000053117
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow
- OT-2026-000053118
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000053121
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow
- OT-2026-000053122
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000053125
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000053129
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000053130
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000053134
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000053137
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio