Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000090824
  Four bellows cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,409 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the

• OT-2026-000090825
  Four bellows cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,375 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the

• OT-2026-000090827
  Foam pad vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,449 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000090828
  Foam pad vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,415 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000090830
  Foam pad vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,434 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000090831
  Foam pad vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,400 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000090833
  Four cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the

• OT-2026-000090834
  Four cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,363 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the

• OT-2026-000090836
  Four cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the

• OT-2026-000090837
  Four cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,363 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the

• OT-2026-000090839
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,407 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090840
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,373 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090842
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,407 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090843
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,373 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090845
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,407 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090846
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,373 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090848
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,447 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000090849
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,413 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000090851
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,432 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000090852
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,398 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000090854
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,395 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090855
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,361 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090857
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,395 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090858
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,361 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the s

• OT-2026-000090860
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090861
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090863
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090864
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090866
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090867
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090869
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,387 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090870
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,353 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090872
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,372 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090873
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,338 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090875
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,335 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090876
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,301 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090878
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,335 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090879
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,301 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090881
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090882
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090884
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090885
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090887
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090888
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090890
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,387 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090891
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,353 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090893
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,372 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090894
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,338 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000090896
  Two cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,335 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000090897
  Two cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,301 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit