Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000026561
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000026562
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000026563
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000026564
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026565
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000026566
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000026571
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000026572
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026573
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000026574
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000026575
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000026576
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026577
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000026578
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000026583
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000026584
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026585
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000026586
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000026587
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000026588
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026589
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000026590
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000026595
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000026596
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026597
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wo
- OT-2026-000026598
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi
- OT-2026-000026599
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000026600
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000026601
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wo
- OT-2026-000026603
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000026606
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi
- OT-2026-000026607
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000026608
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000026609
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wo
- OT-2026-000026610
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi
- OT-2026-000026612
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000026613
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wo
- OT-2026-000026615
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000026616
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000026618
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000026619
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000026620
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000026621
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000026622
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000026625
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000026627
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000026628
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000026630
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000026631
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000026632
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow