Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000025795
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025797
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,220 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000025798
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,

• OT-2026-000025799
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025801
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,186 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000025806
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,296 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000025807
  Foam pad vacuum gripper, three zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025809
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,220 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000025810
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000025813
  Two cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025814
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025819
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025821
  Two cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025822
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,296 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025823
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025825
  Two cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025826
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025831
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025833
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025834
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,281 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025835
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025837
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025838
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025843
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,204 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025845
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025846
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,296 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025847
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025849
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025850
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025855
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,189 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025857
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025858
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,281 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025859
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,154 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025861
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025862
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025867
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,152 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025869
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025870
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach

• OT-2026-000025871
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,117 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025873
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000025874
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,213 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach

• OT-2026-000025877
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,186 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000025879
  Foam pad vacuum gripper, three zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,189 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025882
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,281 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000025883
  Foam pad vacuum gripper, three zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,154 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000025885
  Six cup vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,238 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000025886
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000025889
  Six cup vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,204 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000025891
  Three cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,152 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000025894
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,296 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the w