Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000021958
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021959
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000021962
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021965
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000021967
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000021969
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000021970
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021971
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000021977
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000021978
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021979
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021981
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000021982
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021983
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021989
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000021990
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021991
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021993
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000021994
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021995
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000022001
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022002
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022003
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000022005
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022006
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022007
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000022013
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022014
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022015
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000022017
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022018
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022019
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000022025
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022026
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022027
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000022029
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022030
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022031
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000022037
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022038
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022039
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000022041
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022042
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022043
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000022049
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022050
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000022051
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000022053
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000022054
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000022055
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the