Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000017100
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017102
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000016104
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016105
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000016106
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016108
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016110
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016111
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000016113
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000016115
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000016116
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016117
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000016118
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016120
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016122
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016123
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000016125
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016127
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000016128
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016129
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016130
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016132
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016134
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016135
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000016137
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016140
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016141
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016142
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016143
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000016144
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000016146
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000016147
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000016149
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016152
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000016153
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016154
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000016155
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000016156
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000016158
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000016159
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000016161
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016164
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000016165
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016166
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000016167
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000016168
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000016170
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000016171
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000016173
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016176
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se