Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000088660
  Three cup vacuum gripper, three zone face, three outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,142 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p

• OT-2026-000088662
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088663
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088665
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088666
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088668
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088669
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088671
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,257 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088672
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,222 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088674
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088675
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088677
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088678
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088680
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088681
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088683
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088684
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088686
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088687
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088689
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088690
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088692
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,257 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088693
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,222 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088695
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088696
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088698
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088699
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088701
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088702
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088704
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088705
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088707
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088708
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088710
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088711
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088713
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,257 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088714
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,222 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088716
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088717
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000088719
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088720
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088722
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088723
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000088725
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,202 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000088726
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,167 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000088728
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,202 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000088729
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,167 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000088731
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,202 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000088732
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,167 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000088734
  Foam pad vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the s