Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000087851
  Three bellows cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,343 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000087852
  Three bellows cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,309 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000087854
  Foam pad vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,383 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000087855
  Foam pad vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,349 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000087857
  Foam pad vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,368 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000087858
  Foam pad vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,334 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000087860
  Three cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,331 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000087861
  Three cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,297 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000087863
  Three cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,331 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000087864
  Three cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,297 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000087866
  Four bellows cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087867
  Four bellows cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087869
  Four bellows cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087870
  Four bellows cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087872
  Four bellows cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087873
  Four bellows cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087875
  Foam pad vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,399 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087876
  Foam pad vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,365 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087878
  Foam pad vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,384 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087879
  Foam pad vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,350 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087881
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087882
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087884
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087885
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087887
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087888
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087890
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087891
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087893
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087894
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087896
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,399 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087897
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,365 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087899
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,384 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087900
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,350 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087902
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087903
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087905
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087906
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087908
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087909
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087911
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087912
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087914
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087915
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087917
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,399 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087918
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,365 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087920
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,384 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087921
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,350 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087923
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087924
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po