Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000011618
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011620
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011621
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011623
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011624
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011625
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011626
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpiece is
- OT-2026-000011628
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011629
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011630
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011631
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011633
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011634
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011635
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011636
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpiece is
- OT-2026-000011638Two bellows cup vacuum gripper, two zone face, single stage ejector, pulsed blow-off before set-down
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000011639
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011640
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011641
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011643
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011644
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011645
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011646
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011648
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011649
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011650
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011651
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpiece is
- OT-2026-000011653
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011654
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011655
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011656
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011658
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011659
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011660
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011661
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011663
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011664
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011665
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011666
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpiece is
- OT-2026-000011668
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011669
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011670
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011671
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000011673
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011674
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011675
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011676
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-
- OT-2026-000011678
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000011679
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000011680
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blown off