Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000011991
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000011992
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000011993
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000011994
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011995
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000011996
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000011997
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000011998
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000011999
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000012000Single bellows cup vacuum gripper, common isolation valve, pump fed, pulsed blow-off before set-down
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000012001
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012002
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012003
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000012004
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000012005
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012006
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000012007
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000012008
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000012009
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000012010
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012011
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000012012
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000012013
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012014
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000012015
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000012016
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000012017
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012018
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012019
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012020
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000012021
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000012022
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012023Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000012024
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000012025
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012026
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000012027
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012028
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000012029
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012030
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012031Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000012032
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000012033
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000012034
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000012035Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000012036
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000012037
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000012038
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000012039
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000012040
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo