Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000010679
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000010680
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-
- OT-2026-000010681
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000010682
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, th
- OT-2026-000010683
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posit
- OT-2026-000010684
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000010685
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000010686
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-d
- OT-2026-000010687
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum ci
- OT-2026-000010688
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-
- OT-2026-000010689
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positio
- OT-2026-000010690
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000010691
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000010692
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuu
- OT-2026-000010693
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000010694
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000010695
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000010696
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. T
- OT-2026-000010697
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve, one pressure sensor and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the
- OT-2026-000010698
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The ar
- OT-2026-000010699
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down positi
- OT-2026-000010700
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-
- OT-2026-000010701
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, th
- OT-2026-000010702
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000010703
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, th
- OT-2026-000010704
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacu
- OT-2026-000010705
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000010706
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circ
- OT-2026-000010707
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum ci
- OT-2026-000010708
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum
- OT-2026-000010709
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000010710
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000010711
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010712
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum cir
- OT-2026-000010713
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is ven
- OT-2026-000010714
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000010715
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010716
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000010717
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow
- OT-2026-000010718
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circu
- OT-2026-000010719
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000010720
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000010721
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circu
- OT-2026-000010722
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000010723
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000010724
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000010725
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000010726
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000010727
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, t
- OT-2026-000010728
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi