Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000010038
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000010039
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000010040
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010041
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circ
- OT-2026-000010042
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the se
- OT-2026-000010043
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve.
- OT-2026-000010044
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece rea
- OT-2026-000010045
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, t
- OT-2026-000010046
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ve
- OT-2026-000010047
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one isolation valve, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has r
- OT-2026-000010048
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the
- OT-2026-000010049
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000010050
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000010051
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, t
- OT-2026-000010052
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000010053
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000010054
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000010055
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000010056
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000010057
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000010058
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, th
- OT-2026-000010059
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off b
- OT-2026-000010060
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000010061
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the v
- OT-2026-000010062
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by t
- OT-2026-000010063
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work
- OT-2026-000010064
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000010065
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000010066
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000010067
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The ar
- OT-2026-000010068
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has r
- OT-2026-000010069
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circui
- OT-2026-000010070
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuu
- OT-2026-000010071
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The ar
- OT-2026-000010072
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000010073
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000010074
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece rea
- OT-2026-000010075
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down posi
- OT-2026-000010076
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum
- OT-2026-000010077
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000010078
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000010079
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000010080
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the s
- OT-2026-000010081
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whi
- OT-2026-000010082
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000010083
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the work
- OT-2026-000010084
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000010085
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000010086
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position,
- OT-2026-000010087
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three zone branches, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the