Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000009697
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, three zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. B
- OT-2026-000009698
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, two zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches t
- OT-2026-000009699
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000009700
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000009701
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000009702
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000009703
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi
- OT-2026-000009704
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece i
- OT-2026-000009705
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the va
- OT-2026-000009706
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position
- OT-2026-000009707
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000009708
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000009709
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000009710
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vac
- OT-2026-000009711
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000009712
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000009713
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000009714
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positi
- OT-2026-000009715
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position
- OT-2026-000009716
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000009717
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum c
- OT-2026-000009718
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000009719
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, three isolation valves, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reache
- OT-2026-000009720
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000009721
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000009722
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece
- OT-2026-000009723
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000009724
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000009725
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000009726
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000009727
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the s
- OT-2026-000009728
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000009729
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000009730
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum ci
- OT-2026-000009731
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000009732
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po
- OT-2026-000009733
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the s
- OT-2026-000009734
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000009735
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000009736
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000009737
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000009738
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000009739
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000009740
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000009741
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000009742
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000009743
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000009744
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000009745
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000009746
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos