Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000008902
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down pos
- OT-2026-000008903
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpi
- OT-2026-000008904
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000008905
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece
- OT-2026-000008906
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000008907
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000008908
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000008909
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, two isolation valves, two zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-
- OT-2026-000008910
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000008911
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor
- OT-2026-000008912
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, three zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the se
- OT-2026-000008913
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000008914
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circ
- OT-2026-000008915
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000008916
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacu
- OT-2026-000008917
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000008918
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has re
- OT-2026-000008919
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece h
- OT-2026-000008920
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000008921
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down
- OT-2026-000008922
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workp
- OT-2026-000008923
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000008924
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000008925
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000008926
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the s
- OT-2026-000008927
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000008928
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, four zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down
- OT-2026-000008929
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000008930
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by t
- OT-2026-000008931
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-dow
- OT-2026-000008932
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000008933
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000008934
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down
- OT-2026-000008935
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000008936
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000008937
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posi
- OT-2026-000008938
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000008939
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by
- OT-2026-000008940
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The ar
- OT-2026-000008941
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor
- OT-2026-000008942
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the
- OT-2026-000008943
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000008944
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpie
- OT-2026-000008945
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000008946
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, two zone branches, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiec
- OT-2026-000008947
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the se
- OT-2026-000008948
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000008949
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has rea
- OT-2026-000008950
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is
- OT-2026-000008951
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down p