Vacuum Grippers
Vacuum Grippers within End Effectors.
Category CAT-000000051
Publications
- OT-2026-000005762
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses handling workpieces that do not cover the whole gripp
- OT-2026-000005761
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a
- OT-2026-000005760
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses starting the vacuum at the right moment in the approach
- OT-2026-000005759Porous face vacuum gripper, three stage ejector, contact triggered, vented after set down, open cell
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a contact detector (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supporte
- OT-2026-000005758
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring
- OT-2026-000005757
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered suction
- OT-2026-000005756
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses handling workpiec
- OT-2026-000005755
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejector spen
- OT-2026-000005754
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a pressure sensor (16). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup t
- OT-2026-000005753
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at
- OT-2026-000005752
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a blow-off valve (16). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases
- OT-2026-000005751Bellows cup vacuum gripper, common isolation valve, six outlet manifold, pump fed, contact triggered
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses putting the workpiece do
- OT-2026-000005750
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating
- OT-2026-000005749
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered
- OT-2026-000005748
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuat
- OT-2026-000005747
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a contact detector (16). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches the workpiece firs
- OT-2026-000005746
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where
- OT-2026-000005745
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovere
- OT-2026-000005744
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is s
- OT-2026-000005743
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed
- OT-2026-000005742
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a
- OT-2026-000005741
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment in the
- OT-2026-000005740
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedic
- OT-2026-000005739
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the
- OT-2026-000005738
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without it s
- OT-2026-000005737
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without
- OT-2026-000005736
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where
- OT-2026-000005735
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuousl
- OT-2026-000005734Porous face vacuum gripper, per zone isolation, four outlet manifold, ejector fed, contact triggered
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses handling workpieces that do not cover the whole gripping
- OT-2026-000005732
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses gripping workpieces that are not at th
- OT-2026-000005731
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered
- OT-2026-000005730
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is suppor
- OT-2026-000005729
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a pressure sensor (20). The arrangement addresses knowing that the workpiece is actual
- OT-2026-000005728
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right
- OT-2026-000005727
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air conti
- OT-2026-000005726
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a pressure sensor (16), a vent valve (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup that has not se
- OT-2026-000005725
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per
- OT-2026-000005724
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at
- OT-2026-000005723
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses starting the vacuum at the right moment in the approach, wh
- OT-2026-000005722
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses gripping workpieces that are not
- OT-2026-000005721
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20). The arrangement addresses choosing where the vacuum comes from, where an ejector
- OT-2026-000005720
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment
- OT-2026-000005719
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, wher
- OT-2026-000005718
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid c
- OT-2026-000005717
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air
- OT-2026-000005716
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking to the fa
- OT-2026-000005715
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses starting the vacuum at the right moment in the ap
- OT-2026-000005714
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without
- OT-2026-000005713
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuatin
- OT-2026-000005712
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let g