Vacuum Sensors

Vacuum Sensors within Force and Pressure Sensing.

Category CAT-000000254

Publications

• OT-2026-000094648
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094649
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,289 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094650
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,218 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094651
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094652
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,289 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094653
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,258 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000094654
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,364 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094655
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,329 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094656
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,243 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000094657
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,349 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094658
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,314 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094659
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,206 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094660
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094661
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,277 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094662
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,206 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094663
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094664
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,277 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094665
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,218 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094666
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094667
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,289 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094668
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094669
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,289 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094670
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,218 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094671
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094672
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,289 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094673
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,258 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000094674
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,364 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094675
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,329 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094676
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,243 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000094677
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,349 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094678
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,314 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000094679
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,206 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094680
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094681
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,277 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094682
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,206 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000094683
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094684
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,277 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000094685
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before

• OT-2026-000094686
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,307 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000094687
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,272 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000094688
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before

• OT-2026-000094689
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,307 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000094690
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,272 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000094691
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before

• OT-2026-000094692
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,307 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000094693
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,272 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000094694
  Foam pad vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpie

• OT-2026-000094695
  Foam pad vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the w

• OT-2026-000094696
  Foam pad vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the w

• OT-2026-000094697
  Foam pad vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,226 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpie