Vacuum Sensors
Vacuum Sensors within Force and Pressure Sensing.
Category CAT-000000254
Publications
- OT-2026-000064366
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064367
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000064368
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000064369
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000064370
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000064371
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000064372
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down
- OT-2026-000064373
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064374
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064375
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-dow
- OT-2026-000064376
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000064377
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064378
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064379
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-dow
- OT-2026-000064380
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000064381
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000064382
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000064383
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000064384
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down
- OT-2026-000064385
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064386
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064387
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-dow
- OT-2026-000064388
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000064389
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064390
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064391
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-dow
- OT-2026-000064392
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000064393
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000064394
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000064395
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the wor
- OT-2026-000064396
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000064397
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064398
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064399
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before t
- OT-2026-000064400
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor
- OT-2026-000064401
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064402
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacu
- OT-2026-000064403
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before t
- OT-2026-000064404
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor
- OT-2026-000064405
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000064406
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the s
- OT-2026-000064407
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the wor
- OT-2026-000064408
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000064409
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064410
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached
- OT-2026-000064411
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before t
- OT-2026-000064412
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor
- OT-2026-000064413
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000064414
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached
- OT-2026-000064415
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before t