Vacuum Sensors
Vacuum Sensors within Force and Pressure Sensing.
Category CAT-000000254
Publications
- OT-2026-000063618
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000063619
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.
- OT-2026-000063620
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-do
- OT-2026-000063621
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has r
- OT-2026-000063622
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000063623
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.
- OT-2026-000063624
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000063625
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000063626
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000063627
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Befor
- OT-2026-000063628
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000063629
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000063630
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000063631
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.
- OT-2026-000063632
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-do
- OT-2026-000063633
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow
- OT-2026-000063634
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000063635
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.
- OT-2026-000063636
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000063637
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000063638
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posit
- OT-2026-000063639
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000063640
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000063641
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000063642
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, t
- OT-2026-000063643
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000063644
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000063645
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has
- OT-2026-000063646
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posit
- OT-2026-000063647
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches
- OT-2026-000063648
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000063649
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpie
- OT-2026-000063650
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down posit
- OT-2026-000063651
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000063652
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000063653
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpie
- OT-2026-000063654
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000063655
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000063656
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000063657
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpie
- OT-2026-000063658
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000063659
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000063660
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000063661
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpie
- OT-2026-000063662
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is ven
- OT-2026-000063663
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000063664
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000063665
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-d
- OT-2026-000063666
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000063667
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi