Vacuum Sensors
Vacuum Sensors within Force and Pressure Sensing.
Category CAT-000000254
Publications
- OT-2026-000044526
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044527
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000044529
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000044530
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044531
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000044533
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000044534
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by t
- OT-2026-000044535
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000044537
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000044538
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044539
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044541
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000044542
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044543
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044545
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000044546
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by t
- OT-2026-000044547
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000044549
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000044550
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044551
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044553
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000044554
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044555
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044557
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down po
- OT-2026-000044558
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by t
- OT-2026-000044559
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000044561
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position
- OT-2026-000044562
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown of
- OT-2026-000044563
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044565
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down
- OT-2026-000044566
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000044567
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044569
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000044570
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000044571
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044573
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000044574
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000044575
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000044577
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000044578
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000044579
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044581
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000044582
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000044583
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000044585
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000044586
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000044587
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000044589
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000044590
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000044591
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece