Vacuum Sensors
Vacuum Sensors within Force and Pressure Sensing.
Category CAT-000000254
Publications
- OT-2026-000040120
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000040121
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpie
- OT-2026-000040122
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos
- OT-2026-000040123
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040124
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000040125
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpie
- OT-2026-000040126
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos
- OT-2026-000040127
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp
- OT-2026-000040128
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000040129
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has
- OT-2026-000040130
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position,
- OT-2026-000040131
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040132
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000040133
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpie
- OT-2026-000040134
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos
- OT-2026-000040135
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040136
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000040137
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reach
- OT-2026-000040138
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work
- OT-2026-000040139
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp
- OT-2026-000040140
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000040141
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has
- OT-2026-000040142
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th
- OT-2026-000040143
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040144
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000040145
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has
- OT-2026-000040146
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th
- OT-2026-000040147
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040148
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000040149
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reach
- OT-2026-000040150
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work
- OT-2026-000040151
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp
- OT-2026-000040152
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000040153
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has
- OT-2026-000040154
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th
- OT-2026-000040155
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040156
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000040157
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has
- OT-2026-000040158
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th
- OT-2026-000040159
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000040160
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000040161
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reach
- OT-2026-000040162
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work
- OT-2026-000040163
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000040164
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000040165
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has
- OT-2026-000040166
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th
- OT-2026-000040167
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000040168
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000040169
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has