Vacuum Sensors
Vacuum Sensors within Force and Pressure Sensing.
Category CAT-000000254
Publications
- OT-2026-000039588
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000039589
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039590
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the
- OT-2026-000039591
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000039592
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000039593
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039594
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-d
- OT-2026-000039595
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000039596
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000039597
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000039598
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the
- OT-2026-000039599
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000039600
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000039601
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039602
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the
- OT-2026-000039603
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000039604
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000039605
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039606
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-d
- OT-2026-000039607
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000039608
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000039609
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000039610
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the
- OT-2026-000039611
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000039612
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000039613
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039614
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the
- OT-2026-000039615
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000039616
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000039617
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039618
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the
- OT-2026-000039619
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000039620
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000039621
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000039622
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Aft
- OT-2026-000039623
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000039624
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000039625
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the work
- OT-2026-000039626
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Aft
- OT-2026-000039627
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000039628
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000039629
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the work
- OT-2026-000039630
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the
- OT-2026-000039631
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000039632
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000039633
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece
- OT-2026-000039634
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Aft
- OT-2026-000039635
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000039636
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000039637
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the work