Vacuum Sensors
Vacuum Sensors within Force and Pressure Sensing.
Category CAT-000000254
Publications
- OT-2026-000039888
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position
- OT-2026-000039889
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s
- OT-2026-000039890
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach
- OT-2026-000039891
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000039892
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po
- OT-2026-000039893
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow
- OT-2026-000039894
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the
- OT-2026-000039895
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000039896
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po
- OT-2026-000039897
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s
- OT-2026-000039898
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach
- OT-2026-000039899
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000039900
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie
- OT-2026-000039901
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s
- OT-2026-000039902
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach
- OT-2026-000039903
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000039904
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w
- OT-2026-000039905
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000039906
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp
- OT-2026-000039907
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000039908
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w
- OT-2026-000039909
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039910
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000039911
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000039912
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie
- OT-2026-000039913
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039914
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000039915
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000039916
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w
- OT-2026-000039917
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000039918
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp
- OT-2026-000039919
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000039920
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w
- OT-2026-000039921
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039922
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000039923
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000039924
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie
- OT-2026-000039925
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039926
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000039927
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000039928
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w
- OT-2026-000039929
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000039930
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp
- OT-2026-000039931
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000039932
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w
- OT-2026-000039933
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p
- OT-2026-000039934
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000039935
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000039936
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000039937
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p