Sensors, Controls & Machine Vision

Sensing, machine vision and the control architecture that makes an installation behave as one machine.

Category CAT-000000238

Subcategories

Publications

• OT-2026-000087882
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087883
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087884
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087885
  Four cup vacuum gripper, four zone face, per zone isolation, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087886
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,254 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087887
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087888
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087889
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,254 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087890
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087891
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087892
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,254 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087893
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087894
  Four bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087895
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,294 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000087896
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,399 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087897
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,365 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087898
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,279 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000087899
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,384 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087900
  Foam pad vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,350 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087901
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087902
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087903
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087904
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087905
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087906
  Four cup vacuum gripper, four zone face, per zone isolation, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087907
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,254 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087908
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087909
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087910
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,254 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087911
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087912
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087913
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,254 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087914
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,359 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087915
  Four bellows cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,325 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087916
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,294 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000087917
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,399 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087918
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,365 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087919
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,279 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000087920
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,384 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087921
  Foam pad vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,350 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000087922
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087923
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087924
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087925
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,242 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000087926
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,347 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087927
  Four cup vacuum gripper, four zone face, per zone isolation, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000087928
  Four bellows cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie

• OT-2026-000087929
  Four bellows cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,346 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000087930
  Four bellows cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000087931
  Four bellows cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie