Position and Presence Sensing
Position and Presence Sensing within Sensors, Controls & Machine Vision.
Category CAT-000000245
Subcategories
Publications
- OT-2026-000013101
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013102
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000011613
A magnetic gripping tool comprising one tool-change interface, one magnet assembly and one contact detector. When the magnet assembly reaches the gripping position, the coil is energised by the cell controller. After the workpiece has reached the set-down position, the coil is shut down by the cell controller. The arra
- OT-2026-000011619
A magnetic gripping tool comprising one mounting flange, one magnet assembly, one contact detector and one separating element. After the workpiece has reached the set-down position, the workpiece is released by the separating element. The arrangement is a proposed configuration composed from a typed library of mechanis
- OT-2026-000011672
A mechanical finger gripper comprising one tool-change interface, two gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011677
A mechanical finger gripper comprising one mounting flange, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from
- OT-2026-000011682
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derive
- OT-2026-000011687
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derive
- OT-2026-000011692
A mechanical finger gripper comprising one mounting flange, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from
- OT-2026-000011697
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011702
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011707
A mechanical finger gripper comprising one mounting flange, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from
- OT-2026-000011712
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011717
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011722
A mechanical finger gripper comprising one mounting flange, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from p
- OT-2026-000011727
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011732
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011737
A mechanical finger gripper comprising one mounting flange, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from
- OT-2026-000011742
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derive
- OT-2026-000011747
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derive
- OT-2026-000011752
A mechanical finger gripper comprising one mounting flange, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from
- OT-2026-000011757
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011762
A mechanical finger gripper comprising one tool-change interface, three gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011767
A mechanical finger gripper comprising one mounting flange, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from
- OT-2026-000011772
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011777
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011782
A mechanical finger gripper comprising one mounting flange, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived from p
- OT-2026-000011787
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011792
A mechanical finger gripper comprising one tool-change interface, four gripper fingers and one contact detector. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. The arrangement is a proposed configuration composed from a typed library of mechanism blocks derived
- OT-2026-000011857
A mechanical finger gripper comprising one tool-change interface, two gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the s
- OT-2026-000011862
A mechanical finger gripper comprising one mounting flange, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the separ
- OT-2026-000011867
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011872
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011877
A mechanical finger gripper comprising one mounting flange, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the separa
- OT-2026-000011882
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011887
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011892
A mechanical finger gripper comprising one mounting flange, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the separa
- OT-2026-000011897
A mechanical finger gripper comprising one tool-change interface, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011902
A mechanical finger gripper comprising one tool-change interface, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011907
A mechanical finger gripper comprising one mounting flange, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the separat
- OT-2026-000011912
A mechanical finger gripper comprising one tool-change interface, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the s
- OT-2026-000011917
A mechanical finger gripper comprising one tool-change interface, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the s
- OT-2026-000011922
A mechanical finger gripper comprising one mounting flange, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the separ
- OT-2026-000011927
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011932
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011937
A mechanical finger gripper comprising one mounting flange, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the separa
- OT-2026-000011942
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011947
A mechanical finger gripper comprising one tool-change interface, three gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the electric actuator. After the gripper fingers have been opened, the workpiece is released by the
- OT-2026-000011952
A mechanical finger gripper comprising one mounting flange, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the separa
- OT-2026-000011957
A mechanical finger gripper comprising one tool-change interface, four gripper fingers, one contact detector and one separating element. When the gripper reaches the gripping position, the gripper fingers are closed by the pneumatic actuator. After the gripper fingers have been opened, the workpiece is released by the