Position and Presence Sensing

Position and Presence Sensing within Sensors, Controls & Machine Vision.

Category CAT-000000245

Subcategories

Publications

• OT-2026-000009433
  Foam pad vacuum gripper, three zone face, common isolation valve, pump fed, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,183 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position,

• OT-2026-000009434
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 968 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000009436
  Two bellows cup vacuum gripper, two zone face, three outlet manifold, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,063 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,

• OT-2026-000009437
  Four cup vacuum gripper, four zone face, six outlet manifold, pump fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,002 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down pos

• OT-2026-000009438
  Four bellows cup vacuum gripper, four zone face, common isolation valve, three stage ejector, pressure sensor per zone, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,417 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece ha

• OT-2026-000009439
  Three bellows cup vacuum gripper, three outlet manifold, three stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 955 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circui

• OT-2026-000009440
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,263 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached

• OT-2026-000009441
  Single cup vacuum gripper, common isolation valve, two stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000009442
  Foam pad vacuum gripper, four zone face, six outlet manifold, pump fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the v

• OT-2026-000009444
  Foam pad vacuum gripper, three zone face, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 985 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vent

• OT-2026-000009446
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000009447
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,225 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches th

• OT-2026-000009449
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000009451
  Four cup vacuum gripper, four zone face, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,202 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches

• OT-2026-000009454
  Foam pad vacuum gripper, two zone face, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,245 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000009455
  Single bellows cup vacuum gripper, common isolation valve, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 980 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum

• OT-2026-000009456
  Foam pad vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000009459
  Foam pad vacuum gripper, two zone face, two outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,238 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000009460
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,244 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000009463
  Four bellows cup vacuum gripper, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,072 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000009464
  Two cup vacuum gripper, two zone face, common isolation valve, pump fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,231 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece ha

• OT-2026-000009467
  Two cup vacuum gripper, two zone face, two stage ejector, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 946 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl

• OT-2026-000009469
  Foam pad vacuum gripper, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie

• OT-2026-000009470
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000009471
  Four cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio

• OT-2026-000009474
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi

• OT-2026-000009475
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,258 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpie

• OT-2026-000009477
  Foam pad vacuum gripper, four zone face, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,303 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-dow

• OT-2026-000009478
  Two bellows cup vacuum gripper, two zone face, common isolation valve, plant vacuum fed, pressure sensor per zone, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,260 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection.

• OT-2026-000009484
  Single bellows cup vacuum gripper, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,180 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000009485
  Four cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,105 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000009486
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,180 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000009489
  Single cup vacuum gripper, three stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 994 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum

• OT-2026-000009490
  Three bellows cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 954 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down p

• OT-2026-000009493
  Single cup vacuum gripper, common isolation valve, two stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,051 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor

• OT-2026-000009494
  Foam pad vacuum gripper, four zone face, plant vacuum fed, supply line pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,079 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, four zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000009497
  Single bellows cup vacuum gripper, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,047 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor

• OT-2026-000009498
  Foam pad vacuum gripper, four zone face, six outlet manifold, pump fed, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,194 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set

• OT-2026-000009499
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,110 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp

• OT-2026-000009500
  Single bellows cup vacuum gripper, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 996 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by t

• OT-2026-000009501
  Three cup vacuum gripper, three zone face, four outlet manifold, single stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,219 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached t

• OT-2026-000009503
  Three cup vacuum gripper, three zone face, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,269 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reac

• OT-2026-000009504
  Three cup vacuum gripper, three zone face, common isolation valve, plant vacuum fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,038 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpie

• OT-2026-000009505
  Foam pad vacuum gripper, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000009506
  Four cup vacuum gripper, four zone face, common isolation valve, three stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 986 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,

• OT-2026-000009507
  Two bellows cup vacuum gripper, two zone face, common isolation valve, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,466 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi

• OT-2026-000009509
  Foam pad vacuum gripper, plant vacuum fed, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 926 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the work

• OT-2026-000009510
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,267 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After t

• OT-2026-000009511
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,372 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two isolation valves, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece ha

• OT-2026-000009514
  Four cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,235 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the se