Position and Presence Sensing

Position and Presence Sensing within Sensors, Controls & Machine Vision.

Category CAT-000000245

Subcategories

Publications

• OT-2026-000008544
  Three cup vacuum gripper, three zone face, three outlet manifold, pump fed, pressure sensor per zone, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,195 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has

• OT-2026-000008545
  Foam pad vacuum gripper, two zone face, three stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by

• OT-2026-000008546
  Two cup vacuum gripper, two zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,196 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection

• OT-2026-000008547
  Six cup vacuum gripper, six outlet manifold, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000008549
  Foam pad vacuum gripper, three zone face, four outlet manifold, three stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,167 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circ

• OT-2026-000008551
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,079 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000008552
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,472 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000008554
  Four pad foam vacuum gripper, four outlet manifold, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 918 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente

• OT-2026-000008555
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,318 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000008557
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,388 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workp

• OT-2026-000008559
  Three cup vacuum gripper, three zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpi

• OT-2026-000008560
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,345 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000008561
  Two bellows cup vacuum gripper, two zone face, three outlet manifold, single stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,002 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000008562
  Foam pad vacuum gripper, three zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,438 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached

• OT-2026-000008563
  Foam pad vacuum gripper, three zone face, six outlet manifold, pump fed, pressure sensor per zone, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,255 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, three zone branches, three pressure sensors, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the

• OT-2026-000008566
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,088 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpi

• OT-2026-000008568
  Single cup vacuum gripper, pump fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,037 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the

• OT-2026-000008570
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,355 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000008572
  Three bellows cup vacuum gripper, three zone face, per zone isolation, pump fed, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,059 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three isolation valves, three zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-do

• OT-2026-000008573
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,160 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000008574
  Three cup vacuum gripper, three zone face, per zone isolation, pump fed, pressure sensor per zone, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,440 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three isolation valves, three zone branches, three pressure sensors, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the w

• OT-2026-000008575
  Four cup vacuum gripper, four zone face, common isolation valve, plant vacuum fed, pressure sensor per zone, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,297 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, four zone branches, four pressure sensors, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connec

• OT-2026-000008576
  Two cup vacuum gripper, two zone face, two outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,237 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached t

• OT-2026-000008577
  Four cup vacuum gripper, four zone face, four outlet manifold, pump fed, vented after set-down
  September 17, 2026 · Vacuum Grippers · 927 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position,

• OT-2026-000008578
  Foam pad vacuum gripper, four zone face, four outlet manifold, two stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,088 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu

• OT-2026-000008580
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiec

• OT-2026-000008585
  Three cup vacuum gripper, three zone face, per zone isolation, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,301 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, three isolation valves, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before t

• OT-2026-000008587
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,208 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do

• OT-2026-000008588
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,278 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000008589
  Two bellows cup vacuum gripper, two zone face, per zone isolation, single stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,175 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two isolation valves, two zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000008590
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,062 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-

• OT-2026-000008591
  Four pad foam vacuum gripper, four outlet manifold, three stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 867 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t

• OT-2026-000008592
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,465 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000008593
  Four bellows cup vacuum gripper, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,139 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiec

• OT-2026-000008594
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,328 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum conne

• OT-2026-000008595
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,202 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set

• OT-2026-000008598
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,413 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000008599
  Two cup vacuum gripper, two zone face, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,299 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece r

• OT-2026-000008604
  Electromagnet gripper
  September 17, 2026 · Magnetic Grippers · 533 words

  A magnetic gripping tool comprising one mounting flange, one magnet assembly and one contact detector. When the magnet assembly reaches the gripping position, the coil is energised by the cell controller. After the workpiece has reached the set-down position, the coil is shut down by the cell controller. The arrangemen

• OT-2026-000008605
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,112 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vac

• OT-2026-000008607
  Four cup vacuum gripper, four outlet manifold, three stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 839 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is

• OT-2026-000008608
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,375 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reache

• OT-2026-000008609
  Three bellows cup vacuum gripper, three zone face, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,190 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000008610
  Foam pad vacuum gripper, four zone face, three stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 894 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t

• OT-2026-000008611
  Single bellows cup vacuum gripper, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,097 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. After the workpiece has reache

• OT-2026-000008613
  Three cup vacuum gripper, three zone face, common isolation valve, single stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000008614
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,288 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached

• OT-2026-000008615
  Foam pad vacuum gripper, three zone face, common isolation valve, plant vacuum fed, pressure sensor per zone, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, three zone branches, three pressure sensors, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Befo

• OT-2026-000008616
  Foam pad vacuum gripper, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,230 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000008619
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,097 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpie