Position and Presence Sensing
Position and Presence Sensing within Sensors, Controls & Machine Vision.
Category CAT-000000245
Subcategories
Publications
- OT-2026-000085557
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085558
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085559
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085560
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085561
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085562
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085563
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085564
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085565
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085566
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085567
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000085568
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085569
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085570
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000085571
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085572
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085573
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085574
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085575
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085576
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085577
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085578
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085579Two bellows cup vacuum gripper, two zone face, two stage ejector, sustained blow-off before set-down
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085580
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085581
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085582Two bellows cup vacuum gripper, two zone face, two stage ejector, sustained blow-off before set-down
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085583
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085584
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085585Two bellows cup vacuum gripper, two zone face, two stage ejector, sustained blow-off before set-down
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085586
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085587
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085588
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000085589
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085590
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085591
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000085592
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085593
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000085594
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085595
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085596
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085597
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085598
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085599
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085600
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085601
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085602
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085603
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085604
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000085605
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000085606
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is