Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000061306
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000061309
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000061314
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000061321
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000061326
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000061328
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000061329
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000061332
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000061336
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000061338
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000061340
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000061341
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000061344
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000061348
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000061350
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000061352
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000061353
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000061356
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000061360
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000061362
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000061364
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000060373
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000060377
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by
- OT-2026-000060380
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000060381
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by
- OT-2026-000060385
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by
- OT-2026-000060386
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrangement
- OT-2026-000060390
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrang
- OT-2026-000060392
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000060394
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrang
- OT-2026-000060398
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrangement
- OT-2026-000060402
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrang
- OT-2026-000060404
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000060405
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented b
- OT-2026-000060406
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrang
- OT-2026-000060409
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is ve
- OT-2026-000060410
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The
- OT-2026-000060413
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is ve
- OT-2026-000060414
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060416
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000060417
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is ve
- OT-2026-000060418
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060421
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000060422
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060425
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000060426
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060428
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000060430
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060433
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000060434
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv