Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000060438
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060442
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The
- OT-2026-000060445
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000060446
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000060457
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000060466
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the v
- OT-2026-000060469
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000060470
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the v
- OT-2026-000060472
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpi
- OT-2026-000060474
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arra
- OT-2026-000060478
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060482
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060484
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpi
- OT-2026-000060486
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arra
- OT-2026-000060490
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060494
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arra
- OT-2026-000060496
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpi
- OT-2026-000060498
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060502
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060505
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuu
- OT-2026-000060506
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arra
- OT-2026-000060508
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060510
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060514
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arra
- OT-2026-000060517
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000060518
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060520
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060522
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060526
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arra
- OT-2026-000060529
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000060530
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060532
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060534
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000060537
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000060540
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060549
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000060552
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060558Two pad foam vacuum gripper, two outlet manifold, pump fed, vented after set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000060561
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000060562Two pad foam vacuum gripper, two outlet manifold, pump fed, vented after set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000060564
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060566
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000060569
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000060570Two pad foam vacuum gripper, two outlet manifold, pump fed, vented after set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000060574Two pad foam vacuum gripper, two outlet manifold, pump fed, vented after set-down, on a tool changer
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000060576
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio
- OT-2026-000060578
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000060582
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000060586
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000060588
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio