Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000022693
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000022694
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022698
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000022702
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022705
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000022706
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000022710
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000022714
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022717
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000022718
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000022722
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000022729Two cup vacuum gripper, two outlet manifold, three stage ejector, sustained blow-off before set-down
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000022741Two cup vacuum gripper, two outlet manifold, three stage ejector, sustained blow-off before set-down
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000022747
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000022750
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000022754
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000022758
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000022759
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000022762
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000022766
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000022770
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000022771
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000022774
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022777
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022783
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000022786
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022789
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022795
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000022798
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022801
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000022806
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022815
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000022818
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022827
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000022830
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022833
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000022839
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000022842
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022845
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000022851
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000022854
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022857
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022863
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000022866
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022871
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000022874
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022877
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000022883
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000022886
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022889
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl