Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000022117
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022118
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022119
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000022121
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022122
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022125
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022126
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000022129
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022130
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022131
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000022133
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022134
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000022137
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022141
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022143
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000022145
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022149
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022153
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022155
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000022157
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022158
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000022161
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000022162
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000022165
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022166
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000022167
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000022169
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000022170
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000022174
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000022178
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022179
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000022182
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022186
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022190
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022191
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000022193
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000022194
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022197
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo
- OT-2026-000022198
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022201
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo
- OT-2026-000022202
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022203
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000022205
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000022206
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022209
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo
- OT-2026-000022210
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000022213
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo
- OT-2026-000022214
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000022215
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000022217
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow