Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000041932
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041933
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000041934
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece i
- OT-2026-000041935
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000041936
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041937
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reache
- OT-2026-000041938
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000041939
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000041940
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000041941
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041942
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down pos
- OT-2026-000041943
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re
- OT-2026-000041944
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041945
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi
- OT-2026-000041946
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down pos
- OT-2026-000041947
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re
- OT-2026-000041948
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041949
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi
- OT-2026-000041950
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position,
- OT-2026-000041951
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches
- OT-2026-000041952
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000041953
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041954
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down pos
- OT-2026-000041955
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re
- OT-2026-000041956
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041957
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi
- OT-2026-000041958
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down pos
- OT-2026-000041959
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re
- OT-2026-000041960
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041961
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi
- OT-2026-000041962
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000041963
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, t
- OT-2026-000041964
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000041965
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041966
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041967
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit
- OT-2026-000041968
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041969
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi
- OT-2026-000041970
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041971
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit
- OT-2026-000041972
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041973Three cup vacuum gripper, three outlet manifold, plant vacuum fed, sustained blow-off after set-down
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set
- OT-2026-000041974
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000041975
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, t
- OT-2026-000041976
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000041977
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached t
- OT-2026-000041978
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041979
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit
- OT-2026-000041980
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041981
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached t