Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000041982
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000041983
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit
- OT-2026-000041984
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041985Three cup vacuum gripper, three outlet manifold, plant vacuum fed, sustained blow-off after set-down
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set
- OT-2026-000041987
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, t
- OT-2026-000041988
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the work
- OT-2026-000041989
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached t
- OT-2026-000041991
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit
- OT-2026-000041992
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, th
- OT-2026-000041993
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached t
- OT-2026-000041995
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit
- OT-2026-000040996
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum conne
- OT-2026-000040997
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000040998
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000040999
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000041000
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000041001
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041002
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000041003
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000041004
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000041005
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000041006
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000041007
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000041008
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000041009
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041010Foam pad vacuum gripper, common isolation valve, plant vacuum fed, sustained blow-off after set-down
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workpiece i
- OT-2026-000041011
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000041012
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000041013
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041014
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workp
- OT-2026-000041015
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000041016
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000041017
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041018
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workp
- OT-2026-000041019
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000041020
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000041021
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000041022Foam pad vacuum gripper, common isolation valve, plant vacuum fed, sustained blow-off after set-down
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workpiece i
- OT-2026-000041023
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000041024
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000041025
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041026
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workp
- OT-2026-000041027
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000041028
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000041029
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000041030
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workp
- OT-2026-000041031
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000041032
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000041033
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the work
- OT-2026-000041034
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the