Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000037442
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,219 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-dow

• OT-2026-000037443
  Foam pad vacuum gripper, four zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,244 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reach

• OT-2026-000037444
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037445
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpi

• OT-2026-000037446
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the s

• OT-2026-000037447
  Foam pad vacuum gripper, four zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000037448
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000037449
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece ha

• OT-2026-000037450
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,290 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the s

• OT-2026-000037451
  Foam pad vacuum gripper, four zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,263 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reach

• OT-2026-000037452
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037453
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,263 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpi

• OT-2026-000037454
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,234 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-dow

• OT-2026-000037455
  Foam pad vacuum gripper, four zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reach

• OT-2026-000037456
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037457
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpi

• OT-2026-000037458
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,339 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the s

• OT-2026-000037459
  Four cup vacuum gripper, four zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,121 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000037460
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037461
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,127 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.

• OT-2026-000037462
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,216 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the

• OT-2026-000037463
  Foam pad vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,275 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position

• OT-2026-000037464
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037465
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,232 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conne

• OT-2026-000037466
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,321 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach

• OT-2026-000037467
  Foam pad vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,189 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the

• OT-2026-000037468
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000037469
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,198 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conne

• OT-2026-000037470
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,287 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach

• OT-2026-000037471
  Foam pad vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,294 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position

• OT-2026-000037472
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037473
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,127 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.

• OT-2026-000037474
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the

• OT-2026-000037475
  Foam pad vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,260 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position

• OT-2026-000037476
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece re

• OT-2026-000037477
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,232 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conne

• OT-2026-000037478
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,306 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach

• OT-2026-000037479
  Four cup vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,152 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000037480
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connectio

• OT-2026-000037481
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,198 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conne

• OT-2026-000037482
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,272 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reach

• OT-2026-000037483
  Four cup vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,257 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000037484
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,306 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum con

• OT-2026-000037485
  Six cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has

• OT-2026-000037486
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,234 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000037487
  Four cup vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,223 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000037488
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,272 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum con

• OT-2026-000037489
  Six cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,263 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpie

• OT-2026-000037490
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,339 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037491
  Four cup vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,152 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po