Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000037542
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,234 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-do

• OT-2026-000037543
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000037544
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037545
  Two cup vacuum gripper, two outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,071 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the se

• OT-2026-000037546
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,339 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037547
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp

• OT-2026-000037548
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000037549
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000037550
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,305 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037551
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000037552
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037553
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037554
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,219 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-do

• OT-2026-000037555
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000037556
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037557
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037558
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037559
  Foam pad vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,139 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000037560
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000037561
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000037562
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,290 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037563
  Foam pad vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,245 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000037564
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037565
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037566
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,234 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-do

• OT-2026-000037567
  Foam pad vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,210 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000037568
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037569
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037570
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,339 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037571
  Foam pad vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000037572
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000037573
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000037574
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,305 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037575
  Foam pad vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,230 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000037576
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037577
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037578
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,219 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-do

• OT-2026-000037579
  Foam pad vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,195 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000037580
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,323 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037581
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037582
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,324 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037583
  Two cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp

• OT-2026-000037584
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000037585
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000037586
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,290 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the

• OT-2026-000037587
  Two cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,193 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000037588
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000037589
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000037590
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,234 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-do

• OT-2026-000037591
  Two cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the