Vacuum Safety Systems
Vacuum Safety Systems within Vacuum Lifting.
Category CAT-000000174
Publications
- OT-2026-000051193
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent
- OT-2026-000051194
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vente
- OT-2026-000051201
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuu
- OT-2026-000051214
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whil
- OT-2026-000051226
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whil
- OT-2026-000051229
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by t
- OT-2026-000051238
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051250
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051262
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051274
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051286
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051298
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051310
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the va
- OT-2026-000051322
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the va
- OT-2026-000051334
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented b
- OT-2026-000051346
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented b
- OT-2026-000051358
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051370
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051382
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051394
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051406
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000050634
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050637
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050638
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is above
- OT-2026-000050642
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050646
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is above
- OT-2026-000050649
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050650
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050654
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050658
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is above
- OT-2026-000050661
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050662
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050666
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050670
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is above
- OT-2026-000050673
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050674
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050678
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050681
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circ
- OT-2026-000050682
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is above
- OT-2026-000050686
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050690
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece is
- OT-2026-000050693
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000050694
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent va
- OT-2026-000050698
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the v
- OT-2026-000050702
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the v
- OT-2026-000050706
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the v
- OT-2026-000050710
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece
- OT-2026-000050713
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000050714
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the work
- OT-2026-000050718
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpiece