Vacuum Safety Systems
Vacuum Safety Systems within Vacuum Lifting.
Category CAT-000000174
Publications
- OT-2026-000051022
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve wh
- OT-2026-000051034
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the w
- OT-2026-000051037
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051046
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the w
- OT-2026-000051049
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051054
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the w
- OT-2026-000051061
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051066
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the w
- OT-2026-000051073
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051078
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the w
- OT-2026-000051085
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051086
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the w
- OT-2026-000051097
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posi
- OT-2026-000051098
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051106
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000051109
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posi
- OT-2026-000051118
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whi
- OT-2026-000051126
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whi
- OT-2026-000051129
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit
- OT-2026-000050133
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050137
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpi
- OT-2026-000050141
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050145
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpi
- OT-2026-000050149
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050153
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000050157
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000050161
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000050165
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000050169
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000050173
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000050177
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while th
- OT-2026-000050181
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve wh
- OT-2026-000050185
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while th
- OT-2026-000050189
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve wh
- OT-2026-000050193
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000050201
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050221
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050233
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000050257
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circ
- OT-2026-000050293
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpi
- OT-2026-000050297
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050301
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050305
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpi
- OT-2026-000050309
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050313
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the workpi
- OT-2026-000050317
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050321
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000050329
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000050341
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000050349
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent v