Tool Changers
Tool Changers within End Effectors.
Category CAT-000000055
Publications
- OT-2026-000085227
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085229
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085230
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085232
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000085233
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000085235
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000085236
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000085238
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085239
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085241
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085242
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000085244
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th
- OT-2026-000085245
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th
- OT-2026-000085247
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th
- OT-2026-000085248
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th
- OT-2026-000085250
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th
- OT-2026-000085251
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th
- OT-2026-000085253
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000085254
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000084492
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084494
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084495
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084497
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084498
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084500
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000084501
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000084503
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000084504
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000084506
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084507
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084509
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084510
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000084512
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084513
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084515
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084516
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084518
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084519
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084521
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w
- OT-2026-000084522
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w
- OT-2026-000084524
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w
- OT-2026-000084525
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w
- OT-2026-000084527
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084528
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084530
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084531
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084533
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084534
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084536
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000084537
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos