Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000025107
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025109
  Three cup vacuum gripper, three outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025114
  Foam pad vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,184 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025115
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,153 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025117
  Three cup vacuum gripper, three outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025119
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025121
  Three cup vacuum gripper, three outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025122
  Foam pad vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025126
  Foam pad vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025127
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,153 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025129
  Three cup vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025131
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025133
  Three cup vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025134
  Foam pad vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,218 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025138
  Foam pad vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,184 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025139
  Foam pad vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,193 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000025141
  Three cup vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025143
  Foam pad vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000025145
  Three cup vacuum gripper, three outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025146
  Foam pad vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025150
  Foam pad vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000025151
  Foam pad vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,178 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000025153
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025155
  Foam pad vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,143 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000025157
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025158
  Foam pad vacuum gripper, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p

• OT-2026-000025162
  Foam pad vacuum gripper, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p

• OT-2026-000025163
  Four cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,141 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025165
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025167
  Four cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,106 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025169
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000025170
  Foam pad vacuum gripper, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,154 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p

• OT-2026-000025174
  Foam pad vacuum gripper, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,120 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p

• OT-2026-000025175
  Four cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,141 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025177
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the s

• OT-2026-000025179
  Four cup vacuum gripper, four zone face, four outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,106 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000025181
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,040 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the s

• OT-2026-000025182
  Foam pad vacuum gripper, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,200 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025186
  Foam pad vacuum gripper, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,166 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025187
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025189
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the s

• OT-2026-000025191
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025193
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,040 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the s

• OT-2026-000025194
  Foam pad vacuum gripper, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,185 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025198
  Foam pad vacuum gripper, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,151 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025199
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025201
  Three cup vacuum gripper, three outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025203
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025205
  Three cup vacuum gripper, three outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,038 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025206
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,148 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b