Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000025210
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,113 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025211
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025213
  Three cup vacuum gripper, three outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025215
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025217
  Three cup vacuum gripper, three outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,038 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000025218
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025222
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025223
  Foam pad vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,176 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000025225
  Four cup vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025227
  Foam pad vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,141 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000025229
  Four cup vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025230
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,148 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025234
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,113 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025235
  Foam pad vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000025237
  Four cup vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025239
  Foam pad vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000025241
  Four cup vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025242
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025246
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025247
  Four cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025249
  Four cup vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025251
  Four cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025253
  Four cup vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025254
  Two pad foam vacuum gripper, two outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,148 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025258
  Two pad foam vacuum gripper, two outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,113 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025259
  Four cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025261
  Four cup vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025263
  Four cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000025265
  Four cup vacuum gripper, four outlet manifold, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025266
  Two pad foam vacuum gripper, two outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025270
  Two pad foam vacuum gripper, two outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000025271
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000025273
  Four cup vacuum gripper, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025275
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000025277
  Four cup vacuum gripper, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025278
  Two pad foam vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi

• OT-2026-000025282
  Two pad foam vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi

• OT-2026-000025283
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000025285
  Four cup vacuum gripper, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025287
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000025289
  Four cup vacuum gripper, four outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,055 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000025290
  Two pad foam vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi

• OT-2026-000025294
  Two pad foam vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,083 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi

• OT-2026-000025295
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000025297
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,075 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se

• OT-2026-000025299
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000025301
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,040 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se

• OT-2026-000025302
  Two pad foam vacuum gripper, two outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,131 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000025306
  Two pad foam vacuum gripper, two outlet manifold, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,096 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000025307
  Foam pad vacuum gripper, four zone face, four outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,176 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the