Vacuum Sensors

Vacuum Sensors within Force and Pressure Sensing.

Category CAT-000000254

Publications

• OT-2026-000058807
  Two cup vacuum gripper, two zone face, six outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058809
  Three cup vacuum gripper, three outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,005 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000058810
  Six pad foam vacuum gripper, six outlet manifold, two stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,143 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058811
  Two cup vacuum gripper, two zone face, six outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,285 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058813
  Three cup vacuum gripper, three outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,111 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000058814
  Six pad foam vacuum gripper, six outlet manifold, two stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,057 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu

• OT-2026-000058815
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,226 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000058817
  Three cup vacuum gripper, three outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000058818
  Six pad foam vacuum gripper, six outlet manifold, two stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,163 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058819
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,332 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058821
  Three cup vacuum gripper, three outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,005 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000058822
  Six pad foam vacuum gripper, six outlet manifold, two stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,128 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058823
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,297 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058825
  Three cup vacuum gripper, three outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,111 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000058826
  Six pad foam vacuum gripper, six outlet manifold, three stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,072 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu

• OT-2026-000058827
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,226 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000058829
  Three cup vacuum gripper, three outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000058830
  Six pad foam vacuum gripper, six outlet manifold, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,178 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058831
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,332 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058833
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 989 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000058834
  Six pad foam vacuum gripper, six outlet manifold, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,143 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058835
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,297 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058837
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,095 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp

• OT-2026-000058838
  Six pad foam vacuum gripper, six outlet manifold, three stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,057 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu

• OT-2026-000058839
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,226 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000058841
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,060 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp

• OT-2026-000058842
  Six pad foam vacuum gripper, six outlet manifold, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,163 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058843
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,332 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058845
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 989 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000058846
  Six pad foam vacuum gripper, six outlet manifold, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,128 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum

• OT-2026-000058847
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,297 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058849
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,095 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp

• OT-2026-000058850
  Six pad foam vacuum gripper, six outlet manifold, plant vacuum fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,058 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000058851
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,266 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000058853
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,060 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workp

• OT-2026-000058854
  Six pad foam vacuum gripper, six outlet manifold, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000058855
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,372 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058857
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 988 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000058858
  Six pad foam vacuum gripper, six outlet manifold, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000058859
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,337 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058861
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow

• OT-2026-000058862
  Six pad foam vacuum gripper, six outlet manifold, plant vacuum fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,043 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000058863
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,251 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000058865
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,059 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow

• OT-2026-000058866
  Six pad foam vacuum gripper, six outlet manifold, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000058867
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058869
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 988 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posi

• OT-2026-000058870
  Six pad foam vacuum gripper, six outlet manifold, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000058871
  Foam pad vacuum gripper, two zone face, six outlet manifold, two stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,322 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058873
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-dow