Vacuum Sensors

Vacuum Sensors within Force and Pressure Sensing.

Category CAT-000000254

Publications

• OT-2026-000058941
  Four cup vacuum gripper, four outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,005 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000058942
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,221 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000058943
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,337 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058945
  Four cup vacuum gripper, four outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,111 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000058946
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,326 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000058947
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,251 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000058949
  Four cup vacuum gripper, four outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000058950
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,292 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000058951
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,357 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058953
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 989 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000058954
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,206 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000058955
  Foam pad vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,322 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000058957
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,095 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpi

• OT-2026-000058958
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,311 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000058959
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,214 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000058961
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,060 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpi

• OT-2026-000058962
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,277 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000058963
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058965
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 989 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000058966
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,173 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the work

• OT-2026-000058967
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,285 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058969
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,095 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpi

• OT-2026-000058970
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,278 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before th

• OT-2026-000058971
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,214 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do

• OT-2026-000058973
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,060 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpi

• OT-2026-000058974
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,244 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before th

• OT-2026-000058975
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058977
  Four cup vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 988 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000058978
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the work

• OT-2026-000058979
  Two cup vacuum gripper, two zone face, six outlet manifold, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,285 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000058981
  Four cup vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000058982
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,263 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before th

• OT-2026-000058983
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,211 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before

• OT-2026-000058985
  Four cup vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,059 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000058986
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before th

• OT-2026-000058987
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,317 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000058989
  Four cup vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 988 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000058990
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,204 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-do

• OT-2026-000058991
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,282 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000058993
  Four cup vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000058994
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,309 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000058995
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,211 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before

• OT-2026-000058997
  Four cup vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,059 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000058998
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,275 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000058999
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,317 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000059001
  Six cup vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,005 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000059002
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,189 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-do

• OT-2026-000059003
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,282 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. B

• OT-2026-000059005
  Six cup vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,111 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000059006
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,294 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the