Vacuum Sensors

Vacuum Sensors within Force and Pressure Sensing.

Category CAT-000000254

Publications

• OT-2026-000057001
  Two cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057002
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,210 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000057003
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,321 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057005
  Two cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000057006
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,315 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-dow

• OT-2026-000057007
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,286 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057009
  Two cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057010
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,281 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-dow

• OT-2026-000057011
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,215 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000057013
  Two cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000057014
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,177 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000057015
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,321 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057017
  Two cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,263 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057018
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,282 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before t

• OT-2026-000057019
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,286 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057021
  Two cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,229 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057022
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,248 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before t

• OT-2026-000057023
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,255 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000057025
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,108 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Bef

• OT-2026-000057026
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,162 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000057027
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,361 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000057029
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,213 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connectio

• OT-2026-000057030
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,267 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before t

• OT-2026-000057031
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,326 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000057033
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,179 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connectio

• OT-2026-000057034
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,233 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before t

• OT-2026-000057035
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,240 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000057037
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,108 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Bef

• OT-2026-000057038
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,208 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000057039
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,346 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000057041
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,213 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connectio

• OT-2026-000057042
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,313 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000057043
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,311 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000057045
  Two cup vacuum gripper, two outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,179 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connectio

• OT-2026-000057046
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,279 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000057047
  Three cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000057049
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,140 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reache

• OT-2026-000057050
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,193 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000057051
  Three cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,309 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057053
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,245 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece

• OT-2026-000057054
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,298 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000057055
  Three cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,274 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057057
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,211 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece

• OT-2026-000057058
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,264 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the

• OT-2026-000057059
  Three cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000057061
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,140 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reache

• OT-2026-000057062
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,225 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000057063
  Three cup vacuum gripper, three zone face, three outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,309 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches

• OT-2026-000057065
  Two cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,245 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece

• OT-2026-000057066
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,330 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down