End Effectors

End Effectors within Robotics & Automation.

Category CAT-000000050

Subcategories

Publications

• OT-2026-000095480
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,418 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpie

• OT-2026-000095481
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,523 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095482
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,489 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095483
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,418 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpie

• OT-2026-000095484
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,523 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095485
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,489 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095486
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,458 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches t

• OT-2026-000095487
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,563 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece rea

• OT-2026-000095488
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,529 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece rea

• OT-2026-000095489
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,443 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches t

• OT-2026-000095490
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,548 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece rea

• OT-2026-000095491
  Foam pad vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,514 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece rea

• OT-2026-000095492
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,406 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpie

• OT-2026-000095493
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,511 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095494
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,477 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095495
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,406 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpie

• OT-2026-000095496
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,511 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095497
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,477 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the w

• OT-2026-000095498
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,358 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095499
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,463 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095500
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,429 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095501
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,358 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095502
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,463 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095503
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,429 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095504
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,358 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095505
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,463 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095506
  Two bellows cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,429 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095507
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,398 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000095508
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,503 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set

• OT-2026-000095509
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,469 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set

• OT-2026-000095510
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,383 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000095511
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,488 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set

• OT-2026-000095512
  Foam pad vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,454 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set

• OT-2026-000095513
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,346 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095514
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,451 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095515
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,417 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095516
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,346 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095517
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,451 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095518
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,417 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095519
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,358 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095520
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,463 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095521
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,429 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095522
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,358 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095523
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,463 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095524
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,429 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095525
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,358 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000095526
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,463 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095527
  Two bellows cup vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,429 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000095528
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,398 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000095529
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,503 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, two pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set