End Effectors
End Effectors within Robotics & Automation.
Category CAT-000000050
Subcategories
Publications
- OT-2026-000084390
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084391
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000084392
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084393
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084394
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000084395
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000084396
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000084397
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000084398
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000084399
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000084400
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000084401
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084402
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084403
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000084404
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084405
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000084406
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084407
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084408
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084409
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084410
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084411
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084412
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084413
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084414
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084415
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000084416
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084417
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084418
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000084419
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084420
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084421
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084422
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084423
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084424
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084425
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084426
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084427
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084428
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084429
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084430
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084431
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084432
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084433
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio
- OT-2026-000084434
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084435
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p
- OT-2026-000084436
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000084437
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084438
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000084439
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi