End Effectors
End Effectors within Robotics & Automation.
Category CAT-000000050
Subcategories
Publications
- OT-2026-000077286
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by
- OT-2026-000077287
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the s
- OT-2026-000077288
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is ven
- OT-2026-000077289
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000077290
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077291
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077292
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077293
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077294
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077295
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000077296
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077297
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077298
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077299
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077300
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077301
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000077302
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077303
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077304
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077305
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077306
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077307
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000077308
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077309
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077310
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077311
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077312
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077313
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000077314
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077315
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077316
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077317
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077318
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077319
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-dow
- OT-2026-000077320
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077321
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the s
- OT-2026-000077322
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077323
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the s
- OT-2026-000077324
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077325
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-dow
- OT-2026-000077326
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077327
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the s
- OT-2026-000077328
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077329
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the s
- OT-2026-000077330
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000077331
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000077332
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077333
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r
- OT-2026-000077334
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000077335
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r